SPPARKS WWW Site - SPPARKS Documentation - SPPARKS Commands

ellipsoid_depth command

Syntax:

ellipsoid_depth D 

Examples:

ellipsoid_depth 30 

Description:

This command is used in the ellipsoid mode of the potts/weld_jom application to define the maximum ellipsoid depth.

It is also used in the keyhole mode of the potts/weld_jom application to define the maximum depth of the shallow ellipsoid.

Restrictions:

This command can only be used as part of the app_style potts/weld_jom application.

It must be a positive value.

Related commands:

deep_length, deep_width

Default: 1/4 * zhi