SPPARKS WWW Site - SPPARKS Documentation - SPPARKS Commands

app_style potts/pfm command

Syntax:

app_style potts/pfm Q PFsteps lambda M_C KappaC a C1 C2 C3 C4 keyword value ... 

Examples:

app_style	potts/pfm 200 10 0.3 1 1 0.5 0.25 0.75 0.05 0.95
app_style	potts/pfm 200 10 0.3 1 1 0.5 0.25 0.75 0.05 0.95 &
			reset_phasefield yes &
			print_connectivity yes &
			initialize_values yes &
			enforce_concentration_limits yes 

Description:

This is an on-lattice application which evolves a Q-state Potts model in combination with a phase field Cahn-Hilliard model. It can be used to efficiently simulate grain growth in a two-phase system controlled by diffusion. For a full description of the model, see the paper by Homer et al..

See the examples/potts_pfm directory for an example script using this command. See the Pictures web page for images of simulations performed with this command.


The following additional commands are defined by this application:

temperature set Monte Carlo temperature

Restrictions: none

Related commands:

app_style potts

Default:

The keyword defaults are reset_phasefield = no, print_connectivity = no, initialize_values = no, enforce_concentration_limits = no.


(Homer) Homer, Tikare, Holm, Computational Materials Science, 69, 414-423 (2013).